Kohler Engines. Relentless Power. Legendary Performance.

HD Series

HD775

HD775

Based on KOHLER commercial engine designs, HD Series™ heavy-duty models outshine other consumer walk and utility engines with 2x longer useful engine life certified by Kohler (KOHLER HD Series vs. KOHLER XT Series™ EPA Emissions Certification).

Gross Torque
Shaft
Cylinders
Cooling
Fuel Type
Status
7.75 Vertical Single Air Current
Engine Uses
Specs
Overview
Features
Engine Uses
Utility Equipment
Walk Mower

Equipment Types

This engine powers the following equipment:

  • Edger
  • Mower, Walk-Behind
Specs

Engine Type:

Four-cycle, single-cylinder, air-cooled, vertical shaft, gasoline, OHV, with cast iron liner.

Model
HD775
J1940 Torque lbs. ft (Nm) 1 7.75 (10.5)
Displacement cu in (cc) 9.1 (173)
Bore in (mm) 2.7 (70)
Stroke in (mm) 1.8 (45)
Compression Ratio 8.5:1
Dry Weight lbs (kg) 26.9 (12.2)
Oil Capacity U.S. quarts (L) 0.625 (0.59)
Lubrication Splash
Dimensions L x W x H in 17.1 x 13.9 x 11
Backpressure Limit 2 40
J1995 Torque lbs ft (Nm) 3 7.46 (10.11)
J1995 Rated Speed (RPM)  2800
* Length is valve cover to end of blower housing. Width is blower housing width. Height is mounting feet to top of cyclonic air cleaner.
1 Power (hp) and Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

3 J1995 power and torque certified by 3rd Party Witness